HBC-X Series Current Transducer Hall Effect Sensor with 0 to 50A Input,Epoxy Encapsulated Housing
HBC-X Series Hall Effect Sensor
Feature
* Closed- loop
* Supply voltage: DC±15V ±5%
* Capable measurement of currents: DC, AC,pulse with galvanic isolation between primary circuit and secondary circuit.
Advantages
* Easy installation
* Can be customized
* High accuracy
* Very good linearity
* Optimized response time, no insertion losses
* Low power consumption
* Low temperature drift
* High immunity to external interference
Applications
* Inverter applications
* AC/DC variable-speed drive
* Uninterruptible Power Supplies (UPS)
* Switched Mode Power Supplies (SMPS)
* Photovoltaic (PV) current applications
* New Energy Combiner Box Measurement
* Automible By-wire application
* Electric vehicle charging equipment current sensing
* Household appliance frequency conversion Electromagnetic water heater current measurement
ELECTRICAL DATA:
HBC10XA | HBC20XA | HBC30XA | HBC50XA | ||
Rated input current | 10 | 20 | 30 | 50 | A |
Test current range | 20 | 40 | 60 | 100 | A |
Turns ratio | 1000 | 1000 | 1500 | 2500 | T |
Sec winding resistance | 60 | 60 | 100 | 150 | Ω |
Rated output current | 10±0.5% | 20±0.5% | 20±0.5% | 20±0.5% | mA |
Supply voltage | ±15±5% | V | |||
Offset current | ≤±0.25 | mA | |||
Offset current Drift | -40~+85℃ ≤±0.5 | mA | |||
Linearity | ≤±0.2 | %FS | |||
Class | ≤±0.7 | % | |||
di/dt | >50 | A/µS | |||
Response time | <1 | µS | |||
Bandwidth | DC~200 | KHZ | |||
Insulation voltage | 2.5 | KV | |||
Operating Temperature | -40~+85 | ℃ | |||
Storage Temperature | -40~+105 | ℃ |
Turns |
Turns ratio |
Rated input current IPN[A] |
Rated output voltage VOUT[V] |
Pri DCR[mΩ] |
Pri inductance [uH] |
Single phase | 1 | ±10(±20,±30,±50) | 2.5±0.625 | 0.05 | 0.025 |
2 | ±5(±10,±15,±25) | 2.5±0.625 | 0.20 | 0.1 | |
4 | ±2.5(±5,±7.5,±12.5) | 2.5±0.625 | 1.00 | 0.4 | |
three-phase | 1 | ±10(±20,±30) | 2.5±0.625 | 0.05 | 0.025 |
Notes: Product specifications can be customized